Makita 9032 9mm Filing Sander (240v/110v)

The Makita 9032 is a single speed variable filing sander and is just the tool for those awkward jobs where space is at a premium, the speed can be set by the speed dial fitted making it suitable for a wide range of materials. Supplied with a roller that will accept a belt size of 9mm x 533mm, you can also purchase a smaller belt of 6mm or a slightly wider belt of 13mm.

The sanding arm pivots allowing for an angle of up to 100° and due to its design you can also sand on the tip of the arm, so for all of those hard to reach areas that in the past have required you to tear of a strip of sandpaper, there is now a tool for that job. A dust extraction port is situated on the bottom of the machine and will except the standard vacuum hose so keeping the dust down to a minimum.

• Belt Size: 9 x 533 mm
• Noise sound pressure: 84 dB(A)
• Noise sound power: 95 dB(A)
• Noise K factor: 3 dB(A)
• Input wattage: 500 w
• Belt Speed: 300 - 1700 m/min
• Vibration K factor: 1.5 m/sec²
• Vibration: Sanding: 2.5 m/sec²
• Net weight: 1.5 kg

• Variable speed control
• Constant speed under load
• Double Insulation