Makita DLX2372 18v LXT 2 Piece Kit (All Versions)

The Makita DLX2372 18v twin pack is the perfect kit for the scaffolder and includes the popular DTW300 1/2" impact wrench that makes light work of tightening and loosening couplers, the DHR242 rotary hammer for setting anchor points plus a fast charger, carry case and a choice of batteries.

Makita DTW300 1/2" 18v Brushless Impact Wrench

The Makita DTW300Z impact wrench replaces the DTW285Z, which has been the best selling impact wrench for the scaffold industry with improved features and power. The DTW300Z has 330Nm of torque with 580Nm of nut-busting power to crack difficult joints and is powered by a brushless motor for less time charging batteries. The variable speed trigger can be changed to full speed mode, where full speed is reached faster with shorter trigger travel for improved productivity of around 30%. The 4-speed impact power selection provides optimal fastening.

Other features include a bright twin LED lamp to illuminate the fastening area, auto-stop and auto-slowdown to prevent nut loss by running off the thread and an electronic brake for better control. The DTW300Z has a 1/2" square drive and is suitable for standard bolts M10-M20 and high tensile bolts M10-M16.

Makita DHR242 18v Brushless Rotary Hammer Drill

The Makita DHR242Z compact SDS drill is a three-mode machine with rotary hammer for masonry drilling, hammer only for masonry chiselling and rotary only for drilling wood and steel and features variable speed and reverse. The DHR242Z features a brushless DC motor that increases battery runtime by around 30% and reduces maintenance. A rubberised rear D grip and side handle make this tool compact, well balanced and comfortable to use and at just 3.3kg, it is suitable for prolonged use.

• Voltage: 18 v
• Capacity in Concrete: 24 mm
• Capacity in Steel: 13 mm
• Capacity in Wood: 27 mm
• Impact energy: 2.0 J
• Blows per minute: 0 - 4700 bpm
• No Load Speed (Hi): 0 - 950 rpm
• Vibration: Drilling: 3.5 m/sec²
• Vibration K factor: 1.5 m/sec²
• Vibration: Hammer Drilling: 13.5 m/sec²
• Vibration: Chiselling: 10.5 m/sec²
• Net weight: 3.3 kg

• Blows per Minute (Max) - ipm: 0 - 4,000 ipm
• No Load Speed (max/hard/med/soft): 0 - 3,200 / 2,600 / 1,800 / 1,000 rpm
• Nut Busting Torque: 580 Nm
• Voltage: 18 v
• Driving Shank: 1/2" Square
• Blows per Minute (Hi) - ipm: 0 - 3,400 ipm
• Blows per Minute (Med) - ipm: 0 - 2,600 ipm
• Blows per Minute (Lo) - ipm: 0 - 1,800 ipm
• Standard Bolt: M10-M20
• High Tensile Bolt: M10-M16
• Noise sound pressure: 97 dB(A)
• Noise sound power: 108 dB(A)
• Noise K factor: 3 dB(A)
• Max Fastening Torque: 330 Nm
• Vibration: Fastening Bolt: 12.5 m/sec²
• Vibration K factor: 1.5 m/sec²
• Net weight: 1.5 - 1.8 kg

• One touch slide chuck for SDS plus bit
• Easy-to-grip handle ergonomically designed to: +give maximum power thrust. +provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
• 3 mode operation +Rotation + Hammering +Hammering only +Rotation only
• The tool body is separated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers
• Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30%
• Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact

• Electric brake
• Variable speed control by trigger
• Forward / reverse rotation
• LED job light
• Brushless motor
• Electronic 4 stage impact power selection
• Trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button. Because in full speed mode the trigger travel is shorter, the full speed is reached faster
• Auto-stop system available both in forward/reverse rotation modes