Makita DTW1002 18v Brushless 1/2" Impact Wrench (All Versions)

The Makita DTW1002 is a high torque cordless impact wrench with a maximum tightening torque of 1,000Nm and features a brushless motor that increases battery run time by 30-40%. It features an ergonomic soft grip for firm control and reduced vibration.

An electronic 3-stage impact power selection (Hard/Medium and Soft) deliver a huge maximum torque of 1,000Nm and a nut busting torque of 1,600Nm means it can loosen a bolt that has been tightened up to 1,600Nm. Other features include twin LED lights to illuminate the work area, an electric brake stops rotation almost immediately the trigger is released and a protection circuit prevents battery overload and overheating. Bolt capacities are M12-M30 in standard bolts and M10-M24 in high tensile.

This unit accepts standard ½" impact sockets but a ring spring on the square drive means that the pin and O ring are not required meaning faster bit change.

• Nut Busting Torque: 1,600 Nm
• Voltage: 18 v
• Driving Shank: 1/2" Square
• Blows per Minute (Hi) - ipm: 0 - 2,200 ipm
• Blows per Minute (Med) - ipm: 0 - 2,000 ipm
• Blows per Minute (Lo) - ipm: 0 - 1,800 ipm
• Standard Bolt: M12-M30
• High Tensile Bolt: M10-M24
• Noise sound pressure: 97 dB(A)
• Noise sound power: 108 dB(A)
• Noise K factor: 3 dB(A)
• No Load Speed (hard/med/soft): 0 -1,800 / 1,000 / 900 rpm
• Max Fastening Torque: 1000 Nm
• Vibration: Fastening Bolt: 18 m/sec²
• Vibration K factor: 1.5 m/sec²
• Net weight: 3.6 kg

• Extra-high max tightening torque
• Brushless motor
• Electric brake
• Variable speed control by trigger
• Forward/reverse rotation
• Twin LED job light
• Electronic 3-stage impact power selection (Hard/Medium/Soft)
• Compact and lightweight design
• Ergonomic soft grip