Description
The Makita HR3210C single speed variable, 3 mode SDS+ hammer drill is fitted with AVT, Makita's anti vibration technology, the bench mark in vibration reduction, designed to protect the user from excessive hand vibration when used for prolonged periods. Powered by an 850watt motor and with a joule rating of 6.4js and a maximum blows per minute of 3300. It has a drilling capacity of 32mm in concrete with a solid drill bit and a 90mm capacity with a TCT core bit.
Makita's HR3210C is the next step up from the Makita HR2811 and is designed to be used where more power and a more aggressive chisel action is required and ideally suits the plumber and electrician.
Specification
- Impact energy: 5.0 J
- Max in concrete: 32 mm
- Impacts per minute: 1650 - 3300 ipm
- Input Wattage: 850 w
- Max core diameter (TCT): 90 mm
- Vibration K factor: 1.5 m/sec²
- Net weight: 4.9 kg
- No Load Speed: 315 - 630 rpm
- Vibration: Drilling: 2.5 m/sec²
- Vibration: Chiselling: 7 m/sec²
- Vibration: Hammer Drilling: 10 m/sec²
- Noise sound pressure: 89 dB(A)
- Noise K factor: 3 dB(A)
- Noise sound power: 100 dB(A)
Benefits
- Torque limiter: The drill stops when the bit hits against reinforcements
- Triple operation mode: Rotary only, hammer only and rotary hammer
- Soft start
- Constant speed under load
- Built-in job light
- Anti vibration technology
What's Included?
- HR3210C AVT SDS+ Rotary Hammer Drill
- Side Handle
- Depth Gauge
- Bit Grease
- Carry Case