Compare
ESTABLISHED 30 YEARS
ESTABLISHED 30 YEARS
DELIVERY (OVER £99)
FREE DELIVERY (OVER £99)
1 HOUR DELIVERY SLOTS BY TEXT & EMAIL
1 HOUR DELIVERY SLOTS BY TEXT & EMAIL
Makita DLX2131TJ-2 18v LXT 2 Piece Kit (2x5Ah)

Makita DLX2131TJ-2 18v LXT 2 Piece Kit (2x5Ah)

£290.00
(inc VAT)
Order in
days
:
23 Hours
:
59 Mins
:
Secs
For
Delivery on
In Stock

Description

The Makita DLX2131 features the DHP482 combi drill with hammer and 21 torque settings plus the DTD152 high speed impact driver with a huge 165Nm of maximum torque.

Makita DHP482 18v LXT Combi Drill

This well balanced combi features a variable speed trigger with forward and reverse and an impressive maximum torque of 62Nm, the 2 speed gearbox has metal gears and an electric brake stops rotation almost immediately once the trigger is released. Twin LED lights illuminate the work area and a single sleeve 13mm keyless chuck allows for rapid bit change. Drilling capacities are 13mm in masonry and steel, 38mm in wood and a 21 stage torque setting allows for accurate screwdriving in both high and low gear. Being part of the Makita Lithium-Ion family it can accept all 18v Li-Ion batteries from 1.5Ah to 5Ah and incorporates a battery protection circuit to prevent overload and overheating. A rubber moulded handle gives better grip and reduces vibration and a handy belt clip can be fitted both left and right handed.

Makita DTD152 18v LXT Impact Driver

Lightweight and well balanced this unit is ideal for single handed use and features a rubberised grip for superior control, twin LED lights illuminate the work area and a ¼" single sleeve chuck allows for rapid bit change. The variable speed trigger is ergonomically positioned with the forward/reverse lever easily accessible by the thumb and forefinger. The electronic brake stops rotation almost immediately the trigger is released and being part of the 18v Lithium-Ion family this unit accepts all Li-ion batteries 1.5Ah to 5Ah and has built in battery protection to protect from overload and high temperature. The DTD152 has a high maximum rotation speed of 2,900rpm and fixing capacities of M5-M16 bolts and will comfortably drive large screws into hardwoods without pilot drilling.

Specification

DHP482
  • Voltage: 18 v
  • Capacity in Steel: 13 mm
  • Capacity in Wood: 38 mm
  • Chuck Capacity: 1.5 - 13 mm
  • Capacity in Masonry: 13 mm
  • Blows per Minute (Hi) - ipm: 0 - 28,500 ipm
  • Blows per Minute (Lo) - ipm: 0 - 9,000 ipm
  • Noise sound pressure: 82 dB(A)
  • Noise sound power: 93 dB(A)
  • Noise K factor: 3 dB(A)
  • No Load Speed (Hi): 0 - 1,900 rpm
  • No Load Speed (Lo): 0 - 600 rpm
  • Torque Settings: 21 + drill
  • Max. Fastening Torque (Soft Joint): 36 Nm
  • Max. Fastening Torque (Hard Joint): 62 Nm
  • Vibration K factor: 1.5 m/sec²
  • Vibration: Impact drilling into concrete: 6.0 m/sec²
  • Vibration: Drilling into metal: 2.5 m/sec²
  • Net weight: 1.8 kg
DTD152
  • Voltage: 18 v
  • Driving Shank: 6.35mm (1/4") Hex
  • Machine Screw: M4-M8
  • Impacts per Minute: 0 -3,500 ipm
  • Standard Bolt: M5-M16
  • High Tensile Bolt: M5-M12
  • Coarse thread (length): 22 - 125 mm
  • Noise sound pressure: 93 dB(A)
  • Noise sound power: 104 dB(A)
  • Noise K factor: 3 dB(A)
  • No Load Speed: 0 - 2900 rpm
  • Max Fastening Torque: 165 Nm
  • Vibration: Fastening Bolt: 10.5 m/sec²
  • Vibration K factor: 1.5 m/sec²
  • Net weight: 1.5 kg

Benefits

DHP482
  • Electric brake
  • 2 mechanical gears
  • Variable speed control by trigger
  • Forward/reverse rotation
  • Twin LED job light
  • Ergonomic soft grip
  • Keyless Chuck
  • Compact and lightweight design
  • Equipped with Battery protection circuit: designed to protect the battery from damages due to over discharge, high temperature or overload current
  • Metal gears
DTD152
  • Electric brake
  • Variable speed control by trigger
  • Forward/reverse rotation
  • Twin LED job light
  • Ergonomic soft grip
  • Compact and lightweight design
  • Equipped with Battery protection circuit: designed to protect the battery from damages due to over discharge, high temperature or overload current
  • High rotation speed
  • One-touch bit installation

What's Included?

  • DHP482 18v LXT Combi Drill
  • DTD152 18v LXT Impact Driver
  • 2 x BL1850B 5Ah Batteries
  • DC18RC Fast Charger
  • MakPac 3 Carry Case + Inlay
Trustpilot